SPECIFICATIONS:
- Metal drapery rod.
- Maximum length for one rod in a handcrafted finish is 240 in. / 20 ft.
- Maximum length for one rod in a powder coat finish is 156 in. / 13 ft.
- We recommend ring glide tape when using drapery rings or grommets to help protect the finish from friction.
- Use Connector Screw Set ACBSCR to join rods.
- Splice is not weight bearing and must be supported by a bracket.
- 1 in. Scale drapery rings will fit this rod; but, will not slide (use for stationary panels only).
- 2 in. Metal drapery rings are recommended for functioning draperies, which are under the 1" scale
Tips for saving on freight fees:
- Buy smaller rods (under 104” in length) and join them onsite using a connector screw (sold separately) , especially when using center draw and/or stationary panels. A support bracket will be needed where you join the rod.
- Have your order delivered to a commercial address. Freight carriers charge additional fees for delivery to residential addresses.
This rod is hollow and can easily be cut onsite. Be sure to order a extra plug .
